# \#checklist

**URL:** https://gweikeforum.com/tag/checklist/5.md

[Latest](https://gweikeforum.com/latest.md) · [Categories](https://gweikeforum.com/categories.md) · [Tags](https://gweikeforum.com/tags.md)

---

## [Info on gases needed](https://gweikeforum.com/t/info-on-gases-needed/33)

<div class="topic-metadata">

**Author:** [@Voicing7095](https://gweikeforum.com/u/Voicing7095)\
**Replies:** 1\
**Last updated:** [June 18, 2026, 8:42pm UTC](https://gweikeforum.com/t/info-on-gases-needed/33 "2026-06-18T20:42:36Z")

</div>

I have no experience with laser cutting or engraving but have a use for it so I decided to buy this machine. I’m struggling with getting all the info I need. There is no spec sheet outlining all the requirements. What I…

---

## [Pre-Installation Requirements: What You Need Before Your M Series Arrives](https://gweikeforum.com/t/pre-installation-requirements-what-you-need-before-your-m-series-arrives/24)

<div class="topic-metadata">

**Author:** [@mike0188](https://gweikeforum.com/u/mike0188)\
**Replies:** 1\
**Last updated:** [June 16, 2026, 5:46pm UTC](https://gweikeforum.com/t/pre-installation-requirements-what-you-need-before-your-m-series-arrives/24 "2026-06-16T17:46:36Z")

</div>

Pre-Installation Requirements: What You Need Before Your M Series Arrives Setting up your Gweike M Series 6-in-1 machine requires proper preparation. Here’s everything you need to have ready before installation. 1. Ele…